The new high-performance coating for above-ground concrete protection

With Zentrifix F 21, MC-Bauchemie has developed a single-component, polymer-modified high-performance coating that can be used to quickly repair and durably protect crack-prone concrete substrates and concrete support structures in transport infrastructure, industrial buildings, agricultural structures and high-rise and residential construction.

New, single-component, polymer-modified cement coating Zentrifix F 21 is easy to apply by hand or by wet spraying, can be smoothed and rubbed, and exhibits excellent adhesion to concrete substrates. And, as a high-performance coating, it does not need subsequent treatment with a curing agent. Zentrifix F21 is certified according to EN 1504 Part 2 for Principles 1, 2 and 8, Procedures 1.3, 2.2 and 8.2, i.e. it provides effective protection against penetration of substances, regulates the water balance of the concrete and increases its electrical resistance. Zentrifix F 21 also satisfies German requirements for OS 5b surface protection systems and can be used on both foot and wheeled traffic surfaces.

A layer thickness of 2 mm Zentrifix F 21 produces a calculated concrete cover of 102 cm and a CO₂ diffusion resistance of 882 m equivalent air layer thickness. Such resistance data bear witness to the extraordinary carbonation-inhibiting effect of this innovative coating. Its performance is such that it will, in fact, halt any carbonation activity occurring in the old concrete. The 1C high-performance coating is also chloride-proof, open to water vapour diffusion and resistant to freeze/thaw cycling and de-icing salts, making it ideal for use in splash and spray areas exposed to same. It offers good grade B2 dynamic crack bridging and very good A3 static crack bridging at -20 °C. Zentrifix F 21 high-performance coatings are therefore ideally suited for the rapid repair and lasting protection of concrete substrates and concrete support structures at risk of cracking in agricultural facilities such as digestion towers and silos or transport and industrial structures such as bridges, multi-storey car parks and chimneys, as well as in high-rise building and residential construction components such as balcony balustrades, parapets and soffits.

Zentrifix F 21 is tested in combination with systems of the MC-Color Flex product line – pigmented, highly flexible, crack-bridging coatings for the protection of weather-exposed exterior concrete surfaces – earning it a fire resistance rating of D-s2, d0. In addition to the durable protection of buildings, MC-Bauchemie’s new concrete coating also offers a reduced carbon footprint and a lower cost level: As a single-component product used in relatively low application thicknesses, its attributable CO₂ emissions are relatively low, as are the costs associated with its transport, storage and disposal. Preservative-free, Zentrifix F 21 is, moreover, produced using resource-efficient methods involving local raw materials.

Your contact:
Saki M. Moysidis, Head of PR & Communication